SWX2310P-28GTL2 Switch

The SWX2310P-28GT is an intelligent L2 switch capable of powering PoE devices across your network. Leveraging our expertise in networking and professional audio, this switch has been optimized to accommodate Dante audio networks.

IGMP and QoS settings can be automatically optimized for Dante network operation by simply selecting the Dante profile in the web-based GUI. These network settings are not critical in simple systems, but proper configuration is essential to ensure maximum stability in larger Dante networks.

In the Web GUI's ProAV Settings enables to assign settings for major ProAV profiles like Dante, NDI, and so on to ports with just a click. This makes it easy to use both NDI and Dante on the same switch.

Additionally, the ProAV Settings screen in the Web GUI allows you to easily check multicast settings and operations. It clearly shows multicast activity, which helps quickly resolve issues that often cause problems in ProAV networks.

The SWX2310P-28GT is an intelligent L2 switch optimized for Dante networks, known worldwide for AoIP, allowing integrators to quickly establish stable networks by simplifying settings, monitoring, management, and operation. When Dante PoE devices, like the VXC2P, are connected to the SWX2310P-28GT, settings optimized for Dante are automatically applied via LLDP, a protocol for exchanging system management data between neighboring devices. PoE+ compliant ports can supply up to 30W to each port simultaneously, powering not only PoE compliant devices like wireless access points, but also higher-output PoE+ devices such as the VXC2P and RM-CR.

Yamaha LAN Monitor is a dedicated software that allows for quick troubleshooting. Easily check PoE status, turn PoE on/off, and use the snapshot function to detect any differences or faults in the network state since setup. The web GUI provides a full range of monitoring functionality, including dead/alive monitoring for PoE devices, allowing you to restart a PoE device if a fault occurs and receive email notifications of faults.

Take a “snapshot” when the network is initially set up to automatically keep track of any alerts or setting changes that could cause trouble like cable disconnections, devices turning off, or incorrect connections made prior to performances.

Identifying devices connected to a switch with only IP or MAC addresses is a difficult and error-prone approach. Dante devices can use icons and device IDs when set up via the Dante Controller software. Label and Comment fields also let users add useful info, like the location of the device.

The SWX2310P-28GT includes built-in RADIUS server functionality to augment VLAN capabilities. By setting up one switch as a RADIUS server and linking other switches to it, unauthorized network access can be effectively blocked, ensuring enhanced security even in complex large-scale installations. Device authentication can be quickly and easily configured via a web-based GUI.

Rack-mount brackets are included with the SWX2310P-28GT. These accessories allow units to be installed in 19-inch racks, further increasing installation flexibility.

A one-stop sound solution for remote conferencing that improves the quality of voice communications.

Dante replaces heavy, expensive analog or multicore cabling with LAN cables such as CAT5e and CAT6.

Because Dante uses logical routing instead of physical point-to-point connections, the network can be configured using available ports with just a few clicks.

Systems with Dante can also be easily expanded.

Additionally, Dante supports redundancy configuration, ensuring reliability even in emergency situations.

The SWX2310P-28GT is an intelligent L2 switch optimized for Dante networks, known worldwide for AoIP, allowing integrators to quickly establish stable networks by simplifying settings, monitoring, management, and operation. When Dante PoE devices, like the VXC2P, are connected to the SWX2310P-28GT, settings optimized for Dante are automatically applied via LLDP, a protocol for exchanging system management data between neighboring devices. PoE compliant ports can supply up to 30W to each port simultaneously, powering not only PoE compliant devices like wireless access points, but also higher-output PoE devices such as the VXC2P and RM-CR.

Upon connection, Dante devices like the VXC2P will automatically configure settings via LLDP to turn off EEE, update QoS settings, and others to optimize those devices for Dante networks.

Voice Lift is a key feature of ADECIA Ceiling Solutions that allow multiple voices within a room to be lifted and heard clearly by everyone. One SWX2310P-28GT can accommodate all devices required with simple networking, monitoring, and management.