XMV Series Power Amplifiers

XMV4280-D XMV4280 XMV4140-D XMV4140
Output power 1kHz (THD+N=1%: 4Ω) 280W x 4 280W x 4 140W x 4 140W x 4
1kHz (THD+N=1%: 8Ω) 280W x 4 280W x 4 140W x 4 140W x 4
1kHz (THD+N=1%: 4Ω / Double Power Mode) 560W x 2 560W x 2 280W x 2 280W x 2
1kHz (THD+N=1%: 8Ω / Double Power Mode) 560W x 2 560W x 2 280W x 2 280W x 2
High impedance: 100V line 250W x 4 / 40 Ω 250W x 4 / 40 Ω 125W x 4 / 80 Ω 125W x 4 / 80 Ω
High impedance: 70V line 250W x 4 / 20 Ω 250W x 4 / 20 Ω 125W x 4 / 40 Ω 125W x 4 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 31.7dB 28.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 34.7dB 31.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Frequency response 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz)
S/N ratio ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted)
Crosstalk ≤ -60dB ≤ -60dB ≤ -60dB ≤ -60dB
Input sensitivity +4dBu +4dBu +4dBu +4dBu
I/O Connectors Analog I/O Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced)
Digital I/O RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT)
Speaker Output Barrier strip x 4 pairs Barrier strip x 4 pairs Barrier strip x 4 pairs Barrier strip x 4 pairs
Control ports Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1
Network Shared with Dante ports RJ45 x 1 Shared with Dante ports RJ45 x 1
Input Level +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum)
Protection circuit Load protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Power supply protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Cooling 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow
Power requirements 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions W 480mm (18.9") 480mm (18.9") 480mm (18.9") 480mm (18.9")
H 88mm (3.5") 88mm (3.5") 88mm (3.5") 88mm (3.5")
D 422mm (16.6") 422mm (16.6") 422mm (16.6") 422mm (16.6")
Net weight 8.1kg (17.9lbs) 8.1kg (17.9lbs) 8.1kg (17.9lbs) 8.1kg (17.9lbs)
XMV8280-D XMV8280 XMV8140-D XMV8140
Output power 1kHz (THD+N=1%: 4Ω) 280W x 8 280W x 8 140W x 8 140W x 8
1kHz (THD+N=1%: 8Ω) 280W x 8 280W x 8 140W x 8 140W x 8
1kHz (THD+N=1%: 4Ω / Double Power Mode) 560W x 4 560W x 4 280W x 4 280W x 4
1kHz (THD+N=1%: 8Ω / Double Power Mode) 560W x 4 560W x 4 280W x 4 280W x 4
High impedance: 100V line 250W x 8 / 40 Ω 250W x 8 / 40 Ω 125W x 8 / 80 Ω 125W x 8 / 80 Ω
High impedance: 70V line 250W x 8 / 40 Ω 250W x 8 / 40 Ω 125W x 8 / 40 Ω 125W x 8 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 31.7dB 28.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 34.7dB 31.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Frequency response 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz)
S/N ratio ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted) ≥ 100dB(A-weighted)
Crosstalk ≤ -60dB ≤ -60dB ≤ -60dB ≤ -60dB
Input sensitivity +4dBu +4dBu +4dBu +4dBu
I/O Connectors Analog I/O Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced) Input: Euroblock x 2 (6P, balanced)
Digital I/O RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY) RJ45 x 2 (YDIF IN / OUT)
Speaker Output Barrier strip x 8 pairs Barrier strip x 8 pairs Barrier strip x 8 pairs Barrier strip x 8 pairs
Control ports Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1 Remote, Fault Output : Euroblock (3P) x 1
Network Shared with Dante ports RJ45 x 1 Shared with Dante ports RJ45 x 1
Input Level +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum) +24dBu (Maximum)
Protection circuit Load protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
Power supply protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
Cooling 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow 3-Speed fan x 2, front-to-back airflow
Power requirements 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions W 480mm (18.9") 480mm (18.9") 480mm (18.9") 480mm (18.9")
H 88mm (3.5") 88mm (3.5") 88mm (3.5") 88mm (3.5")
D 422mm (16.6") 422mm (16.6") 422mm (16.6") 422mm (16.6")
Net weight 10.1kg (22.3lbs) 10.1kg (22.3lbs) 10.1kg (22.3lbs) 10.1kg (22.3lbs)